Consumables Finder

To find the right Consumables for your Printer use the search below with your Printer Model or Cartridge Part # .

Cisco WAP4410N Wireless-N Access Point Product may vary from image. Rely only on description for purchasing decisions.

Cisco WAP4410N Wireless-N Access Point [WAP4410N-AU]

Our Price:
(Inc. GST)
Man. Part #:
Our Part #:
1 Cisco Cisco WAP4410N Wireless-N Access Point Available
Est. Delivery:
Contact Us
(No Pick-ups)

Cisco WAP4410N-AU Description:

Features Gigabit ethernet LAN port, Part of the Small Business Series, Supports power via PoE or use the included power adapter.



The Cisco WAP4410N Wireless-N Access Point lets you connect Wireless-N (802.11n), Wireless-G (802.11g), and Wireless-B (802.11b) devices to your wired network, so you can add PCs to the network with no cabling hassle. Power over Ethernet (PoE) support makes the Access point easy to install - you can mount it anywhere, even without ready Access to a power plug. With appropriate PoE support at the other end, you need to run only one cable to the Access point to deliver both data and power. Of course, you can also use the included AC adapter if power is available nearby. Moreover, the integrated quality of service (QoS) features provide consistent voice and video quality on both the wired and wireless networks, enabling the deployment of business-quality voice over IP (VoIP) and video applications.

To protect your data and privacy, the Cisco Wireless-N Access Point supports the industrial-strength wireless security of Wi-Fi Protected Access (WPA), encoding all your wireless transmissions with powerful encryption. The MAC address filter lets you decide exactly who has Access to your wireless network, and advanced logging keeps you apprised of Access attempts. The rogue Access point detection capability notifies the administrator when an unauthorized Access point is detected in the airspace. The WPS (Wi-Fi Protected Setup) feature facilitates simple and secure deployment of security in the wireless network. Configuration is a snap with the web browser-based configuration utility. The Cisco WAP4410N Wireless-N Access Point is the best way to add wireless Access to your existing business network.

Key Features
  • Draft 802.11n wireless networking delivers greater throughput and extended range, maximizing the number of wireless clients per Access point for your small business
  • Easy installation and configuration via a web interface
  • Adjustable and removable dipole antennas with multiple-input, multiple-output (MIMO) 3x3 diversity
  • Gigabit Ethernet LAN interface
  • Supports PoE and external DC power
  • HTTP Redirect facilitates the display of a splash page on initial user access
  • IPv6 host support for managing the Access point over IPv6
  • Multiple basic service set identifier (BSSID) support allows the creation of multiple secure wireless workgroups for users and guests
  • Service set identifier (SSID) to VLAN mapping maintains application security and quality across wireless and wired
  • WPS allows for simple and secure deployment of the wireless network
  • Logging via syslog, email, or local log
  • Wi-Fi Multimedia (WMM) wireless QoS support

Cisco WAP4410N-AU Specifications:

Standards Draft IEEE 802.11n, IEEE 802.11g, IEEE 802.11b, IEEE 802.3, IEEE 802.3u, IEEE 802.3af (Power over Ethernet), 802.1x (security authentication), 802.11i security WPA/WPA2, WMM
Ports Ethernet, Power
Buttons Reset
Cabling type Unshielded twisted pair (UTP) Category 5e or higher
LEDs Power, Ethernet, Wireless, PoE
Operating system Linux
Web user interface Built-in web user interface for easy browser-based configuration (HTTP/HTTPS)
Simple Network Management Protocol (SNMP) version SNMP version 1, 2c
Event logging Event logging, Email logging, Remote syslog
Web firmware upgrade Firmware upgradeable through web browser
Diagnostics. Flash, RAM, LAN, WLAN
Dynamic Host Configuration Protocol (DHCP) DHCP client
HTTP Redirect Redirects initial user Access to an external web server to display company logo or network usage policy
IPv6 host Support for management and control of Access point over IPv6, Supports RFC2460 (IPv6 protocol) and RFC4294 (IPv6 node requirements)
Network Capabilities
Multiple BSSID Supports up to 4 BSSIDs, allowing the creation of multiple virtual Access points
VLANs Supports 802.1q - up to 4 VLANs
SSID to VLAN mapping Supports mapping of SSIDs to VLANs to securely separate workgroups across wireless and wired domains
Spanning Tree Supports 802.1d Spanning Tree Protocol to prevent loops when using wireless distribution system (WDS) links as redundant links in a distribution system
Operating modes Access point mode, point-to-point bridge mode, point-to-multipoint bridge mode, repeater mode, wireless client mode
Load balancing Allows bandwidth control with user-defined CPU usage ratios
Auto-channel selection On boot-up, the Access point selects the least congested channel
802.11d regulatory domain Enables the Access point to provide radio channel settings for client devices, facilitating easy client Access as they move across regulatory domains
WEP/WPA/WPA2 Wired Equivalent Privacy (WEP) 64-bit/128-bit, WPA-Pre-Shared Key (WPA-PSK), WPA2-PSK, WPA-ENT, WPA2-ENT
Access control Wireless connection control: MAC-based
SSID broadcast SSID broadcast enable/disable
Client isolation Supports wireless client isolation between and within SSIDs
802.1X Wireless clients can be authenticated through IEEE 802.1X
802.1X supplicant Supports 802.1X supplicant on the Ethernet port to allow the Access point to authenticate itself to the network
RADIUS server Up to 2 RADIUS servers can be configured for redundancy purposes
WPS Supports WPS, a WI-FI Alliance specification for simple and secure setup of a wireless network
Rogue Access point detection New Access points detected that have not been categorized as known are logged as rogue Access points, allowing the administrator to clamp down on unapproved devices in the network
Quality of Service
QoS 4 queues, 802.1p VLAN priority, WMM wireless priority, Mapping of 802.1p VLAN priority to WMM wireless priority to maintain end-to-end QoS
Spec/modulation Radio and modulation type: 802.11b/DSSS, 802.11g/OFDM, 802.11n/OFDM
Channels Operating channels: 11 North America, 13 most of Europe (ETSI and Japan)
Internal antennas None
External antennas 3 (omnidirectional)
Transmit power
Normal temp range for FCC 802.11b: 16 dBm @ 1TX, 19 dBm @ 2TX, 20.5 dBm @ 3TX, 802.11g: 13 dBm @ 1TX, 16 dBm @ 2TX, 17.5 dBm @ 3TX, 802.11n: 17 dBm @ 1TX @ MCS0~5/8~13, 13 dBm @ 1TX @ MCS6/14, 11 dBm @ 1TX @ MCS7/15, 20 dBm @ [email protected]~5/8~13, 16 dBm @ 2TX @ MCS6/14, 14 dBm @ 2TX @ MCS7/15, 21.5 dBm @ [email protected]~5/8~13, 17.5 dBm @ 3TX @ MCS6/14, 15.5 dBm @ 3TX @ MCS7/15
Transmit power @ normal temp range for ETSI: 11b/g/n: 13 dBm @ 1TX, 16 dBm @ 2TX, 17.5 dBm @ 3TX
Antenna gain in dBi 2
Receiver sensitivity 802.11.n: 300 Mbps at -69dBm, 802.11.g: 54 Mbps at -73dBm, 802.11.b: 11 Mbps at -88dBm
Dimensions 6.69 x 6.69 x 1.60 in.
W x H x D (170 x 170 x 40.7 mm)
Weight 0.86 lb (39 kg)
Power 12V 1A DC input, and IEEE 802.3af compliant PoE, Max power draw: 10.1W
Certification FCC, CE, IC
Operating temperature 32° to 104°F (0° to 40°C)
Storage temperature -4° to 158°F (-20° to 70°C)
Operating humidity 10% to 85%, noncondensing
Storage humidity 5% to 90%, noncondensing
Package Contents Cisco WAP4410N Wireless-N Access Point with PoE, User guide on CD-ROM, Ethernet network cable, Power adapter, Product stands, Registration card
Minimum Requirements 802.11b, 802.11g, 802.11n wireless adapter with TCP/IP protocol installed per PC, Switch/router with PoE support or PoE injector when used with PoE, Web-based configuration: Java-enabled web browser
Product Warranty Limited lifetime hardware warranty with return to factory replacement.
Recently Viewed
Manufacturer Info